How to See Who Is on Your Website Right Now

Tony CarnevaleUpdated November 21, 202611 min read
WebsiteMaintenance.com
Right now
2 people on your site now
Everett, WALeadOn Care Plans · 3 pages so far
Seattle, WALeadOn Home
Bothell, WALeadOn Website Repair
Watch live
The Feed's Right now post on WebsiteMaintenance.com, the demo site: a third person arrives, the Everett visitor moves on to the Contact page, then sends the form.

The short answer

You can see who is on your website right now in this sense: how many people are active in the last five minutes, the page each is reading, their approximate town, where they came from and the last thing they clicked. You cannot see a name until they give you one. Bots are removed before the list is drawn.

What to know

  • The device column is the second thing to read. A list that is all phones at 7pm is people on a couch. Desktops at 10am on a Tuesday includes competitors and suppliers reading your prices.
  • Nobody is identified by name. A visitor is a random identifier in their own browser until they send a form or tap your number.
  • Direct means the browser sent no referring page. It is a gap in the data, and no tool can fill it without guessing.
  • Crawlers, uptime monitors and datacenter traffic are removed before anything is counted, so an empty live screen at 3am is normal.
  • The moments worth watching are the hour after an ad or a mailer goes out. The rest of the time, the inbox and the daily feed are the numbers that matter.

Yes, you can see who is on your website right now, with one limit. A live screen shows how many people are on the site this minute, the page each one is reading, the town their connection resolves to, where they came from, and the last thing they clicked. It does not show a name. The box below is that screen with one visitor on it, and the visitor is you.

Your visit, live

Watch your own visit as a website owner sees it

This is the row you would add to a Live screen for this page. Keep reading and it keeps writing.

1 person on this page right now

Leaves the list in 5:00

……

…
Last did…

Your trail so far

    Where each line comes from

    Town

    Read from your IP address. Right for the region, wrong for the suburb on many connections.

    Came from

    …

    Device

    Your browser states this on every request.

    Last did

    The newest event. On a Live screen this is the line that changes as someone reads.

    Missing from this row: your name. No field in a browser carries it. An owner learns it when you send a form or call.

    Drawn in your browser from this visit. Scroll, click a link or switch tabs and the row updates. Nothing here is stored.

    I watch it for about an hour at a time, when something has just gone out: an ad set switched on, a mailer landing, an email to the customer list. The rest of the month it is the screen I open least.

    Read your own row

    Everything in that box was read from your visit without asking you a question. Your browser stated the device. The referring page, if there was one, arrived with the request. The town came from the address your connection uses, and it is the one field I would trust least: check whether it named your town or the next one over.

    The line marked Last did is the one that makes a live screen worth opening.

    • Scroll a little

      It rewrites itself.

    • Click a link in this article

      It names the link.

    • Switch to another tab

      It says you left, and when you come back it says that too.

    A site owner watching a visitor does not see the screen or the cursor. They see that line change.

    The countdown in the corner is the definition of right now. Every event resets it to five minutes. Stop scrolling, leave the page open and walk away, and after five quiet minutes your row would drop off the owner's list, even though the tab is still open on your desk. Any live count carries a window like this one, and a count that does not state its window cannot be compared with anything.

    On the rowWhere it comes fromHow far to trust it
    The pageThe tracker records each page as it opensExact
    The sourceThe referring page your browser sends, or a click id or tag on the addressExact when present, and absent for apps, texts and typed addresses
    The townLooked up from the IP addressGood for the region, weak for the suburb
    The deviceStated by the browser on every requestExact for phone or computer, since the browser names itself
    The last thing doneScrolls, clicks and form fields, each recorded with its timeExact
    A nameNowhere, until a form is sent or a call is madeNot available
    What a live row shows and where each fact comes from.

    What a live screen can tell you

    Four things, all of them read from the visit itself. The page the person is on, because the tracker records every pageview. The source, because the browser hands over the referring page, or the ad platform stamps a click id on the landing address. The town, because an IP address resolves to an approximate place. And the last thing they did, because clicks, scrolls and form fields are events with a time on them, and the newest event is the one that says whether they are reading the price list or have just opened the quote form.

    Put those together and a live row reads like this: someone in Dallas, from a Meta ad, on the services page, who just opened the quote form. That is enough to know whether the ad is sending the people you wanted and whether the landing page is holding them. It is not enough to know who they are, and it is not meant to be.

    On site now

    2 on the site in the last 5 minutes.

    Seattle, WAGoogle Ads2s ago
    Phone1 page
    Website Maintenance Pricing & Care Plans1:12Scrolled 75% down
    Clicked “Get a free quote”
    Contact Usjust openedReading
    One row in the On site now panel: a visitor from a Google ad clicks Get a free quote on the pricing page, lands on Contact and starts the form.

    The device is on the row too, and on a local business site it is the detail I look at second. A list that is all phones at 7pm is people on a couch deciding whether to call tomorrow. A list that is desktops at 10am on a Tuesday is people at work, and a fair share of them are competitors and suppliers reading your prices.

    What it cannot tell you

    • A name

      Until a person types one into your form or taps your phone number, they are a random identifier stored in their own browser and nothing else.

    • The town is approximate

      Geolocation of an IP address gets the metro area right most of the time and the suburb wrong a lot of the time, and a phone on cellular data can resolve to wherever the carrier routes it. Treat it as a region.

    • Direct means the absence of a referrer

      When a live row says direct, the browser sent no referring page. That covers a typed address, a bookmark, a link in a text message, a link in most email apps, and a link from a document. It is a gap in the data, and no tool can fill it.

    • Nothing records the screen

      There is no video of the person moving a cursor around your page. The row is a list of events with times on them, which is what makes it light enough to run on every site with one script tag and no consent banner.

    I wrote a longer piece on what is and is not possible when you try to identify a website visitor, and the short version is that anyone selling a name for ordinary local and consumer traffic is overselling.

    Watch live visitors on the web and on iPhone

    Venbit Intelligence shows live visitors in two places. On the web, the Feed opens with a Right now post: an Apple map with a marker on each visitor's town, the search or ad that brought them beside it, refreshed every five seconds. On iPhone there is a Live tab that lists anyone active on the site in the last five minutes, newest first, with the page they are on and the last thing they did on it.

    Live in Venbit Intelligence for iPhone on WebsiteMaintenance.com, the demo site behind every screen in this guide, with new rows arriving at the top as people land.

    The phone is where I use it. Nobody sits at a desk watching visitors arrive, but plenty of people glance at a phone from a van or a kitchen the hour after a mailer lands. On the web map, opening a marker follows that visit page by page, and See it in 3D turns the map into a globe with a green dot on every town that has someone on the site. Both screens read the same records, and so do the trails those visitors leave behind.

    Live globe

    23 on the site now · 18 towns · last 30 days

    © Mapbox © OpenStreetMap

    On the site nowLast 30 days

    On the web, See it in 3D turns the live map into a globe and swings it round to the busiest town, with a green dot breathing on each town that has someone on the site now.

    A row leaves the list five minutes after that person's last event. If they are reading one long page without scrolling, the row holds. If they close the tab, it clears. That five-minute window is the definition of right now on this screen, and I am writing it down because a live count without a window is a number that means nothing.

    Bots are left off the list

    Crawlers, uptime monitors and datacenter traffic are removed before anything is counted. A live screen that counted them would read like a busy shop at three in the morning, because search engines and the AI crawlers read a small business site around the clock. If your hosting company's stats page says a hundred people visited yesterday and the live screen is empty most of the day, the difference is machines.

    The detection is by user agent, by empty user agents, and by the cities that belong to cloud regions, Ashburn and the like. Bots are recorded, so you can look at them when you want to know which crawler read what, and hidden from every number by default. I went through how much of a typical site's traffic is bots in a separate article, and the share surprises most owners the first time they see it.

    The Google Analytics Realtime report

    Google Analytics has a Realtime report. Google's own documentation describes it as activity on the site over the last 30 minutes: the users in that window, the pages they are on and the events they have fired. It is there and it works. The reasons an owner stops opening it are the same as for the rest of GA4: it speaks in events and dimensions, and it was built for a desk. If you already run it, the trade-offs for a small business are worth ten minutes before you decide to keep it.

    When watching live is worth your time

    Three moments.

    • The hour after an ad set goes live

      To see whether the clicks land on the page you intended and whether anyone goes further than it.

    • The day a mailer or a flyer lands

      With a tracking link on it, so the rows carry the mailer's name and you can tell its visitors from everyone else's.

    • The minutes after a problem is reported

      When you want to know whether anyone is on the site hitting it right now.

    The ad case is the one I use most. An ad set that is sending people to the wrong page, or to a page that loads slowly on a phone, shows up on the live screen within the first hour as rows that land and leave. Caught on day one, that costs an afternoon. Caught in the month-end report, it costs a month of budget.

    WebsiteMaintenance.com
    Right now
    3 people on your site now
    Tampa, FLOn Home
    Phoenix, AZOn Home
    Denver, COOn Home
    Portland, OROn Care Plans · 2 pages so far
    Austin, TXOn WordPress Maintenance · 3 pages so far
    Watch live
    Ad clicks on the Right now post that land on the home page and leave, each row greyed for a moment before it folds away.

    Outside those moments, I think watching live visitors is a habit worth breaking. One person reading your about page at 9pm tells you nothing you can act on, and five of them tell you nothing either. The number that matters by the end of the week is how many of those people sent a form or tapped the number, and that lives in the inbox and the daily feed, which I covered in what Venbit Intelligence pushes to the phone.

    After the visitor leaves

    A live row does not vanish when the person does. It becomes a trail: the full visit, in order, with the landing page, every page after it, the time on each, the scrolls, the clicks, and whether it ended in a form, a tap or nothing. The trails list on the web portal is where I go the morning after, to read yesterday's visits as a list instead of watching them one at a time.

    Austin, TXOrganic searchBecame a lead3s ago
    ComputerSafari3 pagesFirst visit · Started 2:14 PM, 4m ago
    Home Page0:38Scrolled 75% downClicked “See care plans”
    Website Maintenance Pricing & Care Plans1:52Scrolled 100% downClicked “Get a free quote”
    Contact Usjust openedReading
    Sent the quote request
    Left the site2:18 PM
    One visit on the demo site becoming a trail: home, pricing, then Contact, where the quote request was sent before the person left.

    Filters on that list cut it to the leads, to the people who left a form without sending it, and to the warm visits that read several pages and did nothing. Those three lists are the useful version of who was on my site, because each row on them is a person who did something worth a follow-up.

    See this on your own website

    Venbit Intelligence installs with one line on your site. Free for 14 days, no card needed.

    More website analytics guides

    Every question in this series, from Website Analytics for Small Business Owners.

    Leads inbox4
    Ad performance4
    SEO tracking3
    Visitor behaviour4
    Feed and notifications3
    Goals and measurement4
    Privacy, AI and teams3
    Venbit Intelligence Research19

    Tony Carnevale

    Founder, Venbit

    Tony started Venbit in Mill Creek, WA in 2011 and still does the work: web design, SEO, and the website analytics product the company builds and runs for its own clients. The numbers and screens in his articles come from that product, not from a content mill.

    Sources

    1. Google Analytics Help, [GA4] Realtime report
    2. Venbit metric definitions: visitor, bot traffic, visit

    Questions & Answers

    • You can see how many people are active in the last few minutes, the page each one is on, their approximate town, where they came from and the last thing they clicked. You cannot see a name or an email address unless the person types one into your form. Any analytics tool with a live or realtime screen shows the first list. None can show the second without guessing.

    • No, for ordinary local and consumer traffic. A visitor is a random identifier in their own browser until they fill in a form or tap your phone number, and that is the moment they name themselves. Up to that moment you can see what they did, where they came from, their city and their device, and nothing more.

    • Yes. Google's documentation describes the GA4 Realtime report as activity over the last 30 minutes, with the users in that window, the pages they are on and the events fired. It does not show names either. It shows the visitors its tracking recorded, in GA4's vocabulary of events and dimensions, on a screen built for a desk.

    • Hosting stats count every request, and most requests to a small business site come from crawlers, uptime monitors and scripts. The live screen removes those before counting, so it shows people. If the stats page says a hundred visitors a day and the live screen is empty most of the day, the gap is machines, and the live screen is the truer number.

    • Five minutes after their last event. Reading a long page without scrolling keeps the row there, because the tab is still open and focused. Closing the tab clears it within that window. The window is stated so the count means something. A live number with no stated window is a number you cannot compare with anything.

    More guides with a tool

    See all 23 guides